Spuhr Cantilever Scope Mount 30mm Dia H38mm/1.5″ 0 MIL QDP
Quick detachable cantilever mount featuring side clamp and dual levers on the left side of the mount, with tensioning screws on opposite side of the mount body. Absolute co-witness most clip-on NV units on AR platforms. Allows the scope to be mounted 40 mm/1.57” farther forward than with a non-cantilever mount. 0 MIL/MOA Height: 38 mm/1.5” Length: 151 mm/5.94” (mount body only) Weight: 270 g/9.5 oz 10-degree wedge included
Cantilever Scope Mount Ø30 H38mm/1.5″ 0MIL QDP Picatinny mount for use on AR10 rifles Rings: 30 mm Tilt: 0 MIL/MOA Height: 38 mm/1.5” Length: 151 mm/5.94” (mount body only) Weight: 270 g/9.5 oz Interfaces: 8 sets EAN: 7340150705039 The IDEAL SCOPE MOUNT SYSTEM series of mounts feature eight set of interfaces to attach any of more than 40 different accessories and has a bubble level integrated in the rear plane of the mount body to prevent canting of the rifle. The rings are diagonally cut for increased visibility of the elevation and windage turrets (US Patent 8,733,011). The mounts are machined from billet 7075 T651 aluminum and all aluminum parts are hardcoat anodized. The Torx 20 ring and clamping screws are zinc-nickel coated for corrosion resistance. The screws come pre-waxed from the factory to ensure proper torque values. The mount is shipped with a manual and a “wedge” leveling key. NOTE: The QDP-3016 is a quick detachable version of the SP-3016, designed for use with 56 mm objectives on AR15/AR10 rifles with MIL-STD-1913 or STANAG 4694 rails, and has an absolute co-witness with back-up iron sights. The QDP-3016 will fit most 30 mm scope tubes except for scopes with extended erector housings, such as the US Optics TPAL/EREK.