EOTech Transverse EXPS3 Holographic Red Dot Sight


Out of stock

An operator-grade Holographic Weapon Sight built for close-quarter engagements with fast-moving targets, our Model EXPS3™ HWS® delivers two eyes open shooting, 7mm raised base for lower iron sight access, and night vision capability. Side buttons and an adjustable, quick-detach locking lever for easy installation and removal.

EOTECH’s unique reticle patterns are a critical to delivering fast target acquisition and MOA accuracy at any range. EOTECH reticles feature a 68 MOA ring surrounding a 1 MOA center dot allowing the shooter to quickly pick up and lock on a target.

The Eotech EXPS3-0 Holographic weapon sight is parallax free. It features an eye relief. It is waterproof and submersible to 33 feet depth. The sealing is fogproof internal optics. The color is non reflectivee black and hard coat finish.


reticle is a 68 MOA circle with 1 MOA aiming dot, shortened base only requires at most 2-3/4 inch of rail space comapred to the 4 inch battery sights, single transverse 123 battery to reduce sight length, battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap, better sealing is achieved, average battery life at brightness level 12 is roughly 500-600 hours

Features of EOTech EXPS3 Extreme Holosight:

  • Single transverse 123 battery to reduce sight length
  • Shortened base only requires at most 2 3/4 inch of rail space
  • Battery cap and latch are eliminated and replaced with a simple O-ring, tethered cap; better sealing is achieved
  • Battery compartment is now separated from the base to allow it to hover over the delta ring of the rifle
  • Average battery life at brightness level 12 is roughly 500-600 hours
  • Side buttons, NV compatible with a single quick detach throw lever

Package Contents:

  • EOTech EXPS3 Extreme Red Dot Sight
WARNINGCalifornia`s Proposition 65

Specifications for EOTech Transverse EXPS3 Red Dot Sight, Black w/ 1-Dot Reticle EXPS3-0

FinishHard Coating
Magnification1 x
Objective Lens Diameter0.85 in
Reticle68 MOA Ring and 1 MOA Dot
Illumination TypeHolographic
Illumination ColorRed
Brightness Settings30
Eye ReliefUnlimited
Adjustment TypeMOA
Adjustment Click Value0.5 MOA
Field of View, Linear30 yds at 4 in
Lens MaterialFront Window 1/8in solid glass Rear Window 3/16in Laminate
Optical CoatingAnti-Reflection coating on external surface
Attachment/Mount TypeMIL-STD 1913, Weaver
Battery TypeCR123A
Battery Life1000 hours
Operating Temperature-4 – 122 Fahrenheit
Water Resistance LevelSubmersible
Water Resistant Mark10 m, 33 ft
Length3.5 in
Width2.4 in
Height2.8 in
Weight11.2 oz
Included AccessoriesSight assembly 1 x Type 123 Lithium battery Quick Reference Card Product Registration/Warranty Card
Package TypePolymer hard case
Magnification TypeFixed
Lens FinishFog resistant internal optic
Brightness Index20 daylight settings
Fitboth 1in Weaver and MIL-STD-1913 rail
0-reticle.jpg Our most popular reticle offered, the 68 MOA ring with 1 MOA dot provides three usable aiming points. The aiming points above are based on the following load: .223 cal. 62 gr. 2,900 vel.

 When using other loads and calibers, the operator will have to establish the ranges associated with the aiming points. When using a shotgun, the 68 MOA ring can be used to represent shot patterns but will vary based on choke and shell selection. For ordering this reticle, the model codes will end in -0.


There are no reviews yet.

Be the first to review “EOTech Transverse EXPS3 Holographic Red Dot Sight”